Barcode: 123446
Part number: 20190327 [002] Battery Clamp
Order: BC-042020003, 16.04.2020
Process 1: Soldering – 09:00, 16.04.2020
- 17003 Casted Battery Clamp
- Batch WA3 Shunt
- PKC-075 Spacer
- MT-3334 Solder
- Insert the provided Battery Clamp into the mould and apply the molten Granulate
- Apply pressure for 7s
- Let it cool down
- Measure the width
Battery Clamp with moulded body
- Max Hohnsbein
- max.hohnsbein@zerodefects.com
200-1-3 Injection moulding machine
Document 1
Short description of document
Document 2
Short description of document
Document 3
Short description of document
Document 4
Process 2: Injection Moulding – 09:10, 16.04.2020
- IntM001 Casted Battery Clamp with soldered Shunt
- Batch WA12 Plastic Granulate, Black
Solder the provided Shunt to the bottom of the casted Battery Clamp using the Spacer and Solder
IntM001 Casted Battery Clamp with soldered Shunt
- Max Hohnsbein
- max.hohnsbein@zerodefects.com
200-1-2 Soldering furnace
Document 1
Short description of document
Document 2
Short description of document
Document 3
Short description of document
Document 4
Process 3: Assembling – 09:15, 16.04.2020
- Retaining bracket
- Washer
- Nut
- Assemble the Battery Clamp
- Screw the retaining bracket to the battery clamp using both the washer and the nut
20190327 [002] Battery Clamp
- Max Hohnsbein
- max.hohnsbein@zerodefects.com
200-1-4 Assembly station
| Action Steps | Acknowledged | Timestamp |
|---|---|---|
| Scan battery clamp | Ok | 09:15:54-16.04.2020 |
| Insert retaining bracket | Ok | 09:16:51-16.04.2020 |
| Mount washer | Ok | 09:20:11-16.04.2020 |
| Screw on nut | Ok | 09:22:02-16.04.2020 |
| Take a picture | Ok | 09:24:07-16.04.2020 |
Document 1
Short description of document
Document 2
Short description of document
Document 3
Short description of document
Document 4
Error! Please enter a valid barcode.